Search results

The reinforced concrete open-web sandwich slab is composed of upper rib, lower rib, surface plate and shear key and was applied to long-span structure crossing at 18–30 m. The shear-bearing capacity of shear key, having vital effects on the slab’s bearing capacity, is analysed to present its calculation formula used for the engineering application of the slab.

The shear-bearing capacity of shear key is analysed by the strut-and-tie model and the benchmark model established by the finite element method. Furthermore, the design formula of its shear capacity is given by the parametric analysis of FEM to adjust the result of the strut-and-tie model, using multivariate linear regression analysis of these parameters.

The calculation result of the benchmark model is compared with those of the strut-and-tie model and the standard formula, which indicates that the result of the strut-and-tie model is closer to that of the benchmark model than that of the standard formula. Moreover, the parametric analysis of the finite element model indicates that the volume–stirrup ratio of the shear key and the compression strength of the concrete have lesser effect on the shear capacity compared with the longitudinal reinforcement ratio and the shear-to-span ratio of the shear key and the relative section height of the rib.

The shear capacity of the shear key is provided in the paper by combining the finite element method and the strut-and-tie model, which is different from the calculation of the shear key in local codes and Chinese code, based on the theory of short corbel and the experiment of member. Furthermore, the formula of the shear capacity could be employed in the design and construction of the RC open-web sandwich slab, mainly used in the public and industrial multi-story building with long span to save the dwindling land resource currently.

The purpose of this paper is to study the dynamic characteristics and seismic performance of the composite open-web grid floor structure.

Studied by using mode-superposition response spectrum method and time history analysis method.

The results show that the vertical mode-superposition response spectrum method is close to the time history analysis method. The floor has strong seismic performance, and the deflection and internal force are not large under vertical seism. The vertical seismic action suggested that 10% of the representative value of gravity load should be used to ensure the safety of the structure.

In the design, the mid-span section should be properly strengthened or the variable section design should be adopted.

The purpose of this article is to illustrate the management policies behind the success of Swiss product‐manufacturing companies in international competition.

The study included a few multinational corporations as well as a large number of “hidden champions”.

This part of the study focuses on one management policy that is currently driven by the top management. The management policies capture the optimisation of the global footprint.

The paper provides effective guidance for managers seeking to optimise the global value chain activities. The management policies are complementary perspectives to many existing ideas advocated by practitioners.

Shifting management attention towards the service business and the medium market segment is not easy. There are several barriers limiting management attention.

The purpose of this paper is to integrate the global value chain (GVC) perspective with firms' innovation in emerging economies (EEs) and explain why EE firms can improve their innovation capabilities more from their domestic markets by focusing on R&D and marketing than from original equipment manufacturer/original design manufacturer (OEM/ODM) modes in the GVC and how they contribute to the national innovation system (NIS).

The literature on GVC is reviewed and then several propositions are developed using the example of the underground mobile phone developers in China by integrating the GVC perspective.

The paper proposes that EE firms, especially firms that have a large underdeveloped domestic market such as China, should focus on R&D and marketing instead of on OEM/ODM in GVC to increase their competitiveness and strengthen their NIS. Also implications are drawn from their success in the underground markets to advance knowledge on NIS.

The paper shows that EE firms can build and strengthen their innovation capabilities through intense interaction and learning in domestic markets, which, subsequently, moves them upwards in their GVC. Industrial policy needs to change in order to facilitate such technological entrepreneurship in NIS, whether it is informal or underground.

In some three-dimensional (3D) printing application scenarios, e.g., model manufacture, it is necessary to print large-sized objects. However, it is impossible to implement large-size 3D printing using a single projector in digital light processing (DLP)-based mask projection 3D printing because of the limitations of the digital micromirror device chips.

A multi-projector DLP with energy homogenization (EHMP-DLP) scheme is proposed for large-size 3D printing. First, a large-area printing plane is established by tiling multiple projectors. Second, the projector set’s tiling pattern is obtained automatically, and the maximum printable plane is determined. Third, the energy is homogenized across the entire printable plane by adjusting gray levels of the images input into the projectors. Finally, slices are automatically segmented based on the tiling pattern of the projector set, and the gray levels of these slices are reassigned based on the images of the corresponding projectors.

Large-area high-intensity projection for mask projection 3D printing can be performed by tiling multiple DLP projectors. The tiled projector output energies can be homogenized by adjusting the images of the projectors. Uniform ultraviolet energy is important for high-quality printing.

A prototype device is constructed using two projectors. The printable area becomes 140 × 210 mm from the original 140 × 110 mm.

The proposed EHMP-DLP scheme enables 3D printing of large-size objects with linearly increasing printing times and high printing precision. A device was established using two projectors to practice the scheme and can easily be extended to larger sizes by using more projectors.